For many years now Peco have sold their 4 wheel coach kit for 0-16.5, based on the GVT prototype. It is possible to build several variants of this to give some variety to your model. The Association is pleased to offer a kit of parts to make a bogie coach using the standard coach and an additional set of coach sides and roof. The coach comes in two colours, maroon and green, with gold lining already applied to the sides.
When ordering please remember to specify the colour, maroon or green (Maroon is listed in the contents below).
Couplings are not included. Use either your own preference or, if using Kadees, #146 are recommended.
A set of instructions as previously featured in our Getting Started Handbook (4th Edition) is included.
Note: If you make the End Beams from the black plasticard supplied, there will be a Peco Coach chassis remaining for another project.
Price: £39.00 or £36.00 without the Ratio bogies. Available from Modelling Goods Sales by any of the usual methods.
Contents of kit:
|4-wheel coach|| Peco OR31 Maroon coach kit
| Coach sides and roof
|| 7mmNGA coach extension kit (Maroon)
|Bogies|| Ratio 125 diamond frame bogies
| Floor, seats and bogie packing
|| 0.030" white plastic card
| Sides joining strip and Queen Posts
|| 1mm x 1.5mm styrene strip
| Roof joining strip
|| 0.25mm x 3.2mm styrene strip
|Glazing|| 0.010" clear plastic card
| Door handles
|| 7mmNGA brass (9 off)
| Grab handles
|| 0.8mm brass rod
| Truss rods and posts
|| 1/16" styrene rod
|Solebars|| Styrene channel
| End beams
|| 0.040" black plastic card